构建脚本准备

build.sh

@@ -0,0 +1,29 @@
+#!/bin/bash
+
+set -e
+
+export REGISTRY=registry.yqxpro.com
+
+pushd common-base
+npx devcontainer build \
+			--platform linux/amd64,linux/arm64 \
+			--image-name ${REGISTRY}/devcontainers/common-base --push \
+			--cache-to type=registry,ref=${REGISTRY}/devcontainers/common-base:buildcache,mode=max \
+			--cache-from type=registry,ref=${REGISTRY}/devcontainers/common-base:buildcache
+popd
+
+pushd develop-base
+npx devcontainer build \
+			--platform linux/amd64,linux/arm64 \
+			--image-name ${REGISTRY}/devcontainers/develop-base --push \
+			--cache-to type=registry,ref=${REGISTRY}/devcontainers/develop-base:buildcache,mode=max \
+			--cache-from type=registry,ref=${REGISTRY}/devcontainers/develop-base:buildcache
+popd
+
+pushd universal-base
+npx devcontainer build \
+			--platform linux/amd64,linux/arm64 \
+			--image-name ${REGISTRY}/devcontainers/universal-base --push \
+			--cache-to type=registry,ref=${REGISTRY}/devcontainers/universal-base:buildcache,mode=max \
+			--cache-from type=registry,ref=${REGISTRY}/devcontainers/universal-base:buildcache
+popd

build/build-image.sh

@@ -0,0 +1,37 @@
+#!/bin/bash
+set -eux
+
+export BUILDX_BUILDER=hk-builder
+
+export REGISTRY="registry.yqxpro.com"
+
+export S3_ENDPOINT_URL=https://oss-cn-hongkong-internal.aliyuncs.com
+export S3_REGION=cn-hongkong
+export S3_BUCKET=hk-builder-cache-yqxpro
+export S3_ACCESSKEY=LTAI5t8AtjWfsqQWYnyBeCjH
+export S3_SECRETKEY=UPKF20AmcW2zB5BwAMIQeQgZeTkMEs
+export S3_CONFIG=endpoint_url=${S3_ENDPOINT_URL},region=${S3_REGION},bucket=${S3_BUCKET},access_key_id=${S3_ACCESSKEY},secret_access_key=${S3_SECRETKEY}
+
+build() {
+  local target="$1"
+
+  echo "Build $target started"
+
+  pushd $target
+  npx devcontainer build \
+			--platform linux/amd64,linux/arm64 \
+			--image-name ${REGISTRY}/devcontainers/$target --push \
+	    --cache-to type=s3,${S3_CONFIG},prefix=$target/,mode=max \
+			--cache-from type=s3,${S3_CONFIG},prefix=$target/
+  popd
+
+  echo "Build $target completed"
+}
+
+main() {
+  for target in "$@"; do
+    build "$target"
+  done
+}
+
+main "$@"

build/builder-setup.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+set -eux
+
+export TARGET_USER=ecs-user
+export REGISTRY_IP=172.22.178.82
+
+sudo apt update
+sudo apt install -y npm git
+curl -fsSL https://raw.githubusercontent.com/docker/docker-install/master/install.sh | sh
+sudo usermod -aG docker $TARGET_USER
+
+echo "$REGISTRY_IP registry.yqxpro.com" | sudo tee -a /etc/hosts

build/host-setup.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+set -eux
+
+# SSH 配置中先准备好 hk-builder-linux-arm64 和 hk-builder-linux-amd64
+docker buildx create \
+  --name hk-builder \
+  --driver docker-container \
+  --driver-opt network=host \
+  --platform linux/amd64 \
+  --node hk-builder-linux-amd64 \
+  ssh://hk-builder-linux-amd64
+docker buildx create \
+  --name hk-builder \
+  --driver docker-container \
+  --driver-opt network=host \
+  --platform linux/arm64 \
+  --append \
+  --node hk-builder-linux-arm64 \
+  ssh://hk-builder-linux-arm64

build/registry-setup.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+set -eux
+
+tar xvzf certs.tgz
+docker run -d \
+  --restart=always \
+  --name registry \
+  -v "$(pwd)"/certs:/certs \
+  -e REGISTRY_HTTP_ADDR=0.0.0.0:443 \
+  -e REGISTRY_HTTP_TLS_CERTIFICATE=/certs/registry.yqxpro.com.crt \
+  -e REGISTRY_HTTP_TLS_KEY=/certs/registry.yqxpro.com.key \
+  -p 443:443 \
+  registry:3

system-setup.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+sudo apt update
+sudo apt install -y npm git
+curl -fsSL https://raw.githubusercontent.com/docker/docker-install/master/install.sh | sh
+sudo usermod -aG docker $USER
+docker buildx create --use --bootstrap --name multiarch-builder --driver-opt network=host
+echo "127.0.0.1 registry.yqxpro.com" | sudo tee -a /etc/hosts
+
+tar xvzf certs.tgz
+docker run -d \
+  --restart=always \
+  --name registry \
+  -v "$(pwd)"/certs:/certs \
+  -e REGISTRY_HTTP_ADDR=0.0.0.0:443 \
+  -e REGISTRY_HTTP_TLS_CERTIFICATE=/certs/registry.yqxpro.com.crt \
+  -e REGISTRY_HTTP_TLS_KEY=/certs/registry.yqxpro.com.key \
+  -p 443:443 \
+  registry:3
+
+git clone https://gitea.yqxpro.com/QXYang686/devcontainers.git
+cd devcontainers
+npm install